Birdbath - Antique White - S/1 in Glazed Terra Cotta by Campania International 6802-0101
Our glazed and terra cotta pottery is high fired between 990 (terra cotta) and 1000 (glazed) degrees centigrade to ensure frost resistance and durability. Due to the processes used in the manufacturing of our hand-made and hand-glazed containers, all variations with respect to firing, color, size and crackling are natural occurrences in the manufacturing process. The glazes on our containers consist of natural, not chemical, components and therefore the final color of the product will vary. This process creates the unique beauty of each piece.
- Dimensions: 20.5″ Diam. x 24″H
- Weight: 45 lbs.
- Base: 10.5″ Diam
- Inside Depth of Bowl: 1.5″
- Material: Glazed Terra Cotta
Glazed Terra Cotta Material
- Color is Antique White
- Sold as a set of 1
- Assembly required : yes
- Proudly designed and manufactured in the United States
- No plumbing is needed; water recirculates within the fountain
- Wide choice of color options
- Made in USA
Care & Maintenance: We suggest that birdbath/fountain tops not be left outside in the winter. Once the top fills with water/snow and freezes, the top may crack. All birdbath/fountain bases, bench legs and statuary should be raised up off the ground in winter so they will not freeze to the ground surface. Ideally, a fountain should be stored indoors in the winter away from the elements. However, if a fountain bowl must be left outside, remove all pumps, rubber stoppers, drain pipes, finials and small components, and cover the top with burlap or any absorbent material (old blanket/towel) and then wrapped with dark plastic, making sure that water does not accumulate in the basin and freeze. Fountain pumps, finials, and other small components should be stored indoors. Check the fountain periodically to insure that the cover is secure and water is not accumulating in any fountain component.
Warranty: 6 month Limited warranty against manufacturing defects. Campania International Warranty Policy
Shipping: We offer Free standard shipping on all our products. Usually ships on a pallet to any address in the Continental USA. The carrier will place your items curbside on your property but cannot assist with final placement.
Manufacturing Lead Time to Ship: Made-to-Order as per stain color chosen. Manufacturing lead time 2-3 weeks.
Disclaimer: This water fountain is considered a Custom Fountain. It is Made to order as per the stain and spouts (if applicable) of your choice. The finish stain or paint is hand applied after the fountain is manufactured in accordance with your order. Cancellation of a custom fountain will result in forfeiture of the deposit.
The finishes are designed to replicate the look of natural aging, but unlike a painted finish, the patinas do not prevent the natural aging process. Any cast stone item with a patina finish will weather naturally in an outdoor environment. Because each patina is hand applied in a multi-step process and the product is photographed in natural settings, actual colors may vary.
Prop 65 Warning: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the state of California to cause cancer, and Carbon Monoxide, Lead and Lead Compounds which are known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.