Monaco One-Piece Cast Stone Fountain Basin - 2 Sizes | Majestic Fountains
Call for special pricing! 855-523-7077
☀️Summer Sale☀️
Create Your Oasis
Free Shipping | Tax Free In Most States
About us Blogs Guides and FAQs
Request a Quote Affiliate Marketing Program Trade Program
Skip to content

    Monaco One-Piece Fountain Basin in Cast Stone - #1306 & 1308

    The Monaco is a one-piece cast stone fountain basin with a cut-out profile around the rim rather than a plain circle, which is what makes it worth looking at when the fountain above it is switched off. Two sizes are offered: 59 inches outside with 52 inches of usable pool, and 70 outside with 62 inside. Cast as a single monolith, so there are no seams to seal and nothing to work loose over the years. Hand-finished in the patina you choose. Made in the USA.

    • ✔Hand-cast cast stone, built to weather year-round
    • ✔Self-contained recirculating fountain — no plumbing needed
    • ✔Choose from Giannini's range of hand-applied finishes
    • ✔Handmade to order in the U.S.A.

    Order Giannini Color Samples Here. Shipped right to your door!

    Download: Giannini Swatch Guide 
    Features
    • Cut-Out Rim Profile: Shaped rather than a plain circle, so the basin is part of the composition rather than just a pool.
    • One-Piece Monolith: Cast as a single unit, with no joints to seal, re-seal, or watch for leaks.
    • Two Sizes: 59 inches outside with a 52 inch pool, or 70 outside with 62 inside.
    • Cast Stone: Dense and weather-resistant, built to sit outdoors permanently.
    • Hand-Applied Patina: Every piece is stained by hand after casting, in the finish you choose from the Giannini swatch guide.
    • Made in the USA: Cast to order in the finish specified on your order.
    Specifications

    Sizes:

    • Small #1306: 59" outer width x 52" inner width x 12" H
    • Large #1308: 70" outer width x 62" inner width x 14" H
    • Design: Round, one-piece monolith with cut-out rim
    • Material: Cast stone concrete
    • Pieces Included: Basin only
    • Origin: Made in the USA, made to order

    Please Note:

    • On a one-piece basin beyond 60" diameter, a forklift must be available on site at the time of delivery to unload the basin.

    Natural differences in color and finish may occur.
    Important: Install on leveled ground

    Important: The location you choose for your fountain should be firm and level, both for safety and the fountain's performance. Fountains with a basin should be installed on a thin layer of sand, approximately ½" to 1" in depth, on top of a concrete pad to reduce the risk of stress cracks to the basin and help with leveling. Pedestal-style fountains should be installed on a solid-level foundation. If needed, a concrete pad can be used as a base to avoid erosion caused by rain, sprinklers or splash. It will also prevent the fountain from becoming unlevel.

    Fountain Installation on Leveled Surface - Majestic Fountains

    Helpful guides: How to Install a Fountain on Firm, Level Ground · How to Clean & Maintain Your Outdoor Fountain
    Documents

    Download: Giannini Swatch Guide

    Download: Giannini Fountains Installation and Maintenance Full Guide

    Winter Care and Maintenance Winter Care: Winterizing your outdoor fountain becomes non-negotiable to protect it from freezing temperatures, cracks, and costly repairs. Freezing water expands, which tends to damage the various components of your fountain, such as the basins, pumps, and internal plumbing, if not handled properly. In order to prevent winter damage, start with the right preparation, so your fountain can remain safe, intact, and ready to shine when spring returns.

    Preparing Your Outdoor Fountain for the Freezing Winter - Majestic Fountains

    Read Related Articles:
    Warranty

    Warranty: 1-year warranty against manufacturing defects.
    Shipping & Manufacturing Lead Time

    Shipping: Ships on a pallet to any address in the Continental USA. The Carrier will place your items on your property but cannot assist with final placement.

    Manufacturing Lead time: Winter through Spring approx. 6-8 weeks. Peak Summer Months approx. 9-13 weeks
    Made in USA. Made-To-Order. Individually Hand Built, finished in your color choice.

    Disclaimer: This Basin is considered a Custom Product. It is made to order as per the stain of your choice. The finish stain or paint is hand-applied after the Basin is manufactured in accordance with your order. Cancellation of a custom product will result in forfeiture of the deposit.
    Videos

     

  • FAST and Free Shipping offer: Read our Full Shipping Policy here

    We offer Standard FREE Shipping on All catalogue products. This is applicable to shipping addresses located within the 48 continental States in USA only. This is a standard curbside delivery only.

     

    Order Cancellation and Returns: Read our Full Cancellation & Returns Policy here

    Cancellation: At Majestic Fountains, we support your right to change your mind, cancellations on the Same-Day or Within 24 hours of Order placement, incur in no penalties.

    Returns: If you are not 100% satisfied with your product, we offer a full refund (Some exceptions apply. Not applicable to Custom Orders)

     

    We offer Price Match: Read our Full Price Match Policy here

    We work extremely hard to bring you the absolute best products in the industry. We ensure these amazing products are offered to you at the lowest prices. Our Customers are very important to us, so if your you have found the product your heart desires and find it at a lower price somewhere else, please Contact us and we will do our very best to match or give you our best price.

  • QUESTIONS & ANSWERS

    Have a Question?

    Be the first to ask a question about this.

    Ask a Question