Peotta 2 Tier Concrete Outdoor Fountain - 56 Inch | Majestic Fountains
Call for special pricing! 855-523-7077
☀️Summer Sale☀️
Create Your Oasis
Free Shipping | Tax Free In Most States
About us Blogs Guides and FAQs
Request a Quote Affiliate Marketing Program Trade Program
Skip to content

    Peotta Concrete 2 Tier Outdoor Fountain - 1672

    The Peotta is a two tier concrete fountain, 56 inches tall and 35 wide, with the tiers set far enough apart that the water falls a real distance between them rather than trickling from one to the next. Four and a half feet is a useful height in an ordinary garden — tall enough to be seen over a border, short enough not to dominate it. The form is modern in outline with a traditional cascade. Made to order in the USA.

    • ✔Cast in GFRC - Glass Fiber Reinforced Concrete, built to weather year-round
    • ✔Self-contained recirculating fountain — no plumbing needed
    • ✔Choose from Giannini's range of hand-applied finishes
    • ✔Handmade to order in the U.S.A.

    What's Included: Fountain, Pump & all hardware, and tubing required to properly assemble the fountain.

    Order Giannini Color Samples Here. Shipped right to your door!

    Download: Giannini Swatch Guide 
    Features
    • Long Drop Between Tiers: The tiers are set well apart, so the water falls a real distance rather than trickling across.
    • 56 Inches on 35: Tall enough to be seen over a border, short enough not to dominate it.
    • Modern Outline, Traditional Cascade: A contemporary silhouette carrying a classic tier-to-tier fall.
    • Concealed Pump Included: Sized to the correct gallons per hour and head pressure for this fountain, with the cord routed out of sight.
    • Adjustable Flow Rate: Run it low for a quiet trickle, or open it up for a fuller sound that carries across the space.
    • Hand-Applied Patina: Every piece is stained by hand after casting, in the finish you choose from the Giannini swatch guide.
    • Made in the USA: Cast in reinforced concrete and built to order, finished for your order rather than pulled off a shelf.
    Specifications
    • Dimensions: 56" H x 35" W
    • Design: Two tier
    • Water Capacity: 30 gallons
    • Material: Reinforced cast concrete
    • Shown in Color: Limestone
    • Adjustable Flow Rate: Yes
    • Origin: Made in the USA, made to order

    Natural differences in color and finish may occur.
    Additional Options
    • Auto Fill Float - Helps to maintain the ideal water level in your fountain by automatically refilling as needed. It ensures smooth, uninterrupted operation while reducing manual refills and maintenance.
    • Color-changing Submersible LED Lights - Choose LED lights to illuminate the fountain tiers or basin at night, enhancing its visual appeal after sunset. These submersible, color-changing LED light kits add ambiance, highlight flowing water, and allow you to customize the look of your fountain with multiple color options with a remote control.
    • Dusk to Dawn Sensor with Timer and 3 outlets - Dusk-to-dawn sensor with an integrated timer that automatically turns your devices on at sunset and off at sunrise, saving energy and time. It features multiple timer settings and 3 grounded outlets, making it ideal for powering outdoor lights, fountains, and seasonal decorations with reliable, weather-resistant performance.
    • Algaecide & Scale Remover: Protect and maintain your fountain with a combo of Algaecide & Scale Remover. The non-foaming and non-staining Algaecide kills & prevents algae growth while the Scale and stain remover safely removes and prevents calcium stains and deposits. Available in a combo of 8 Oz or 64 Oz each
    • Fountain Foundation - One of the important things for a fountain to operate correctly is a leveled surface. Enhance your fountain with a stylish foundation from Giannini themselves. These can be ordered in various Stains to match or contrast your fountain - Giannini Fountain Foundations
    • Fountain Cover: Get a water-resistant Canvas Cover to protect the fountain from dirt, debris, and weather exposure when not in use. It also helps during winterization by shielding the fountain and preserving its finish and components. Note: The cover fits the fountain only and does not cover the basin below.
      • 300D: The 300 Denier canvas cover is ideal for moderate to high weather
      • 600D: The 600 Denier canvas cover is ideal for moderate to severe weather
    Important: Install on leveled ground

    Important: The location you choose for your fountain should be firm and level, both for safety and the fountain's performance. Fountains with a basin should be installed on a thin layer of sand, approximately ½" to 1" in depth, on top of a concrete pad to reduce the risk of stress cracks to the basin and help with leveling. Pedestal-style fountains should be installed on a solid-level foundation. If needed, a concrete pad can be used as a base to avoid erosion caused by rain, sprinklers or splash. It will also prevent the fountain from becoming unlevel.

    Fountain Installation on Leveled Surface - Majestic Fountains

    Helpful guides: How to Install a Fountain on Firm, Level Ground · How to Clean & Maintain Your Outdoor Fountain
    Documents

    Download: Giannini Swatch Guide

    Download: Giannini Fountains Installation and Maintenance Full Guide

    Winter Care and Maintenance Winter Care: Winterizing your outdoor fountain becomes non-negotiable to protect it from freezing temperatures, cracks, and costly repairs. Freezing water expands, which tends to damage the various components of your fountain, such as the basins, pumps, and internal plumbing, if not handled properly. In order to prevent winter damage, start with the right preparation, so your fountain can remain safe, intact, and ready to shine when spring returns.

    Preparing Your Outdoor Fountain for the Freezing Winter - Majestic Fountains

    Read Related Articles:
    Warranty

    Warranty: 1-year warranty against manufacturing defects.
    Shipping & Manufacturing Lead Time

    Shipping: Ships on a pallet to any address in the Continental USA. The Carrier will place your items on your property but cannot assist with final placement.

    Manufacturing Lead time: Winter through Spring approx. 6-8 weeks. Peak Summer Months approx. 9-13 weeks
    Made in USA. Made-To-Order. Individually Hand Built, finished in your color choice.

    Disclaimer: This water fountain is considered a Custom Fountain. It is made to order as per the stain and spouts (if applicable) of your choice. The finish stain or paint is hand-applied after the fountain is manufactured in accordance with your order. Cancellation of a custom product will result in forfeiture of the deposit.
    Videos

     

  • FAST and Free Shipping offer: Read our Full Shipping Policy here

    We offer Standard FREE Shipping on All catalogue products. This is applicable to shipping addresses located within the 48 continental States in USA only. This is a standard curbside delivery only.

     

    Order Cancellation and Returns: Read our Full Cancellation & Returns Policy here

    Cancellation: At Majestic Fountains, we support your right to change your mind, cancellations on the Same-Day or Within 24 hours of Order placement, incur in no penalties.

    Returns: If you are not 100% satisfied with your product, we offer a full refund (Some exceptions apply. Not applicable to Custom Orders)

     

    We offer Price Match: Read our Full Price Match Policy here

    We work extremely hard to bring you the absolute best products in the industry. We ensure these amazing products are offered to you at the lowest prices. Our Customers are very important to us, so if your you have found the product your heart desires and find it at a lower price somewhere else, please Contact us and we will do our very best to match or give you our best price.

  • QUESTIONS & ANSWERS

    Have a Question?

    Be the first to ask a question about this.

    Ask a Question

Customer Reviews

Based on 1 review Write a review