One of the trending and popular accessories existing today in the market for the gas fire pits and fire features is the Fire glass. These tiny yet remarkable pieces are a replacement to wood logs and create a generously modern appeal that is suitable for both indoor and outdoor fire pits. They are beautiful, refined and available in reflective colors, to various shapes and sizes. Apart from being classic and timeless, it is one of the most environmentally friendly fire media options to have for your fire feature. Fire glass not only enhances the appearance of your fire feature but it also performs an important role. When compared to wood burning logs, they are resistant to high temperatures and will not burn. They do not produce any smoke or ash, so there is no need to worry about a mess. Yet the result is an impressive, fuller flames. But they can collect dust sometimes which needs cleaning from time to time. Fortunately, it is the only minimal maintenance required and it is hassle free compared to other options. The process for cleaning fire glass is simple and it allows you to keep your glass looking new for many years.
How to Clean Fire Glass:
Follow the simple steps mentioned below to make the fire glass stones new like before. You will need a few supplies for cleaning purposes like hand gloves, bucket, wire mesh strainer, towel or newspaper sheet, tape, water, soap or household vinegar, plastic scooper and a trash bag.
Step 1: Prepare your fire pit.
Preparing your fire pit means to stop the gas supply to the pit and let the fire glass cool down. Make sure you need plenty of time for the fire glass to cool down, so plan it well in advance. Don’t use the fire pit at least for a night if you have used it recently.
Step 2: Safety measures
Safety is a very essential part! It is important to wear protective hand gloves before handling the fire glass. Irrespective of whether you have beads or broken styled pieces, gloves will help to minimize skin contact with sharp edges and keep your hands from getting cut.
Step 3: Remove the existing fire glass from the fire feature
Carefully scoop out the cooled fire glass stones and transfer it to a bucket. In case you don’t have a bucket handy, you can use an old colander or a sieve for cleaning. You can also clean the fire glass in small batches if you have it in huge quantities. Cleaning the fire glass in small batches can help you to get rid of the unwanted dirt and dust particles which are difficult to reach.
Step 4: Wash the fire glass stones
Simple method of cleaning the fire glass is with soap water. Fill the bucket with warm water and add soap and lather it. Stir the soap water and fire glass stones thoroughly, you can use a scrubber to scrub the fire glass. An unused toilet brush also works great for cleaning purposes. The soap water may leave a white residue or film, so it is important to rinse the ire glass thoroughly with clean water.
Another way of cleaning the fire glass stones is by using household vinegar and water solution. Mix water and vinegar in 1:1 ratio. Soak the fire glass in the solution and rinse it with clean water. Note that it is important to rinse the fire glass thoroughly with clean water if you’re using an alcohol or chemical-based cleaner to ensure all flammable substances have been washed away.
Step 5: Dry the fire glass
After rinsing the fire glass, drain the water and lay down towels or newspaper and spread the clean and shiny fire glass evenly on it. Allow the glass to sit until completely dry, make sure there is no moisture left. Any amount of water or moisture left on the fire glass stones can result in popping which is due to the water boiling on the fire glass.
Step 6: Return the fire glass to the fire feature
Clean the fire pit or the burner pan and properly dispose of any small, fragmented pieces leftover. Make sure you conceal the broken pieces securely in a box or wrap up and taped in a newspaper sheet to help Recycling and Reclamation Sorters recycle the material. Now you can add the fire glass back in your fire pit and enjoy the warmth of the fire until it needs to be cleaned next time.
Now that you know that cleaning and maintaining the fire glass is as easy as a cake walk, you can use it for your fire features as well. This will enhance the look of your fire pit adding value to it. You can select from various colours, sizes and shapes as per you likes. Enjoy the warmth of the fire features with your family and friends.
To experience the ease of lighting fire in your fire feature in just one click, the AWEIS system is a hassle free and completely safe option if installed properly. The AWEIS system is manufactured by Fire by design. They have introduced the automatic ignition for the fire features to ease out the procedure of lighting fire. For proper installation of AWEIS systems, fire by design recommends few considerations related to gas, electrical ignition, fire bowls, etc. Here, we will look into the electronic ignition considerations to ensure safe and correct installation of the AWEIS system.
To light your fire feature instantly on a single click, the AWEIS system is hassle free and completely safe if installed properly. The AWEIS system is manufactured by Fire by design. They have introduced the automatic ignition for the fire features to ease out the procedure of lighting fire. For proper installation of AWEIS systems, few considerations need to be taken to account related to gas, electrical ignition, fire bowls, etc. Here, we will investigate the gas considerations to ensure safe and correct installation of the AWEIS system.
Fire pits tables are increasing becoming a necessary component of every backyard. Fire features come is all kinds of styles and sizes. Here we have complied answers to some of the most frequently asked questions when researching for a Fire feature. If you have have a questions not answered here, please feel free to call us