Austin Fountain in Cast Stone by Campania International FT-206
The Austin Fountain's ample basins communicate a feeling of serenity and abundance. The sight of water flowing endlessly from the large upper basin into an even larger water basin down below is charmingly theatrical. Position this spectacular water feature in front of your residence, in the center of a circular driveway, or as the focal point in a paved courtyard for melodramatic effect.
With water bubbling out of the top of the urn and spilling over the beautiful copper spiller into the rectangular basin below, the Austin Garden Water Fountain creates a soothing atmosphere filling your garden with the sounds of a babbling brook. Fiber-reinforced cast stone and a water recirculation system make this fountain both beautiful inside and out.
Recirculating electric pump
All hardware and tubing required to properly assemble the fountain
Full step by step installation instruction
Shown in Alpine Stone (AS)
Dimensions: 47.5" x 23.5" x 37"
Weight: 486 lbs.
Material: Cast Stone
Fiber reinforced cast stone concrete construction
Proudly designed and manufactured in the United States
No plumbing is needed; water recirculates within the fountain
Plugs into any standard 3-prong 110 V electrical outlet
An outdoor-rated extension cord can be used to lengthen the cord
Care & Maintenance: We suggest that birdbath/fountain tops not be left outside in the winter. Once the top fills with water/snow and freezes, the top may crack. All birdbath/fountain bases, bench legs and statuary should be raised up off the ground in winter so they will not freeze to the ground surface. Ideally, a fountain should be stored indoors in the winter away from the elements. However, if a fountain bowl must be left outside, remove all pumps, rubber stoppers, drain pipes, finials and small components, and cover the top with burlap or any absorbent material (old blanket/towel) and then wrapped with dark plastic, making sure that water does not accumulate in the basin and freeze. Fountain pumps, finials, and other small components should be stored indoors. Check the fountain periodically to insure that the cover is secure and water is not accumulating in any fountain component.
Shipping:We offer Free standard shipping on all our products. Usually ships on a pallet to any address in the Continental USA. The carrier will place your items curbside on your property but cannot assist with final placement.
Manufacturing Lead Time to Ship:Made-to-Order as per stain color chosen. Manufacturing lead time 2-3 weeks.
Disclaimer: This water fountain is considered a Custom Fountain. It is made to order as per the stain and spouts (if applicable) of your choice. The finish stain or paint is hand applied after the fountain is manufactured in accordance with your order. The cancellation of a custom fountain will result in forfeiture of the deposit.
The finishes are designed to replicate the look of natural aging, but unlike a painted finish, the patinas do not prevent the natural aging process. Any cast stone item with a patina finish will weather naturally in an outdoor environment. Because each patina is hand applied in a multi-step process and the product is photographed in natural settings, actual colors may vary.
We work extremely hard to bring you the absolute best products in the industry. We ensure these amazing products are offered to you at the lowest prices. Our Customers are very important to us, so if your you have found the product your heart desires and find it at a lower price somewhere else, please Contact us and we will do our very best to match or give you our best price.